CEMS Luncheon – Permeable Reactive Barriers: Proper Characterization, Design, and Implementation – August 13
August 13 @ 11:30 am - 1:00 pm
Topic: Permeable Reactive Barriers: Proper Characterization, Design, and Implementation
Speaker: Mike Mazzerese, Senior Remediation Engineer, AST Environmental
Time: Tuesday, August 13, 11:30am-1pm
CEMS has received one (1) CLE for this presentation
A common solution to limit petroleum hydrocarbon or chlorinated solvent contaminant migration across a site feature (property boundary, stream, etc.) is to install a permeable reactive barrier (PRB) perpendicular to groundwater flow. As the contaminated groundwater flows through the PRB and contacts the remedial amendment, the groundwater concentrations and mass flux are reduced. This presentation will cover PRB characterization, design, and installation of activated carbon based injectate chemistries. Specifically, injection and trenching applications will be discussed. Several project summaries will also be presented.
Mike Mazzarese is a Senior Remediation Engineer at AST Environmental and has been involved with in-situ remediation for 19 years. His responsibilities include project management, research and development, remedial assessment and design, field implementation oversight, and post project data analysis. Mike is a graduate of Penn State University holding BS and MS degrees in Environmental Engineering.
LOCATION: The EPA Conference Center located on the 2nd floor of the EPA Region 8 Headquarters building at 1595 Wynkoop St. The EPA building may have changed since the last time you were there: To get to the EPA Security check in room, simply go up the Atrium stairs or catch the elevator (the room is on the 2nd floor, directly across from the big stairs, entrance door on the left. Since the Security area is smaller than it was before, and the EPA only has one (very sensitive) metal detector, it will take a while so we recommend giving yourself plenty of time. Then please proceed to the Bison Bitterroot Room (where we regularly meet) to register with the CEMS representative.
MEETING FORMAT: Members may either bring their own lunch and attend the meeting for no charge, or they may request that CEMS order a box lunch for them. The cost of the box lunch for members is $16.00; for non-members, $19.00.
RESERVATIONS: PLEASE give your name, company name and phone number via email to email@example.com. PLEASE INDICATE IF YOU ARE RESERVING A BOX LUNCH OR BRINGING YOUR OWN. Reservations must be received BEFORE Friday, August 9, 2019 at 5:00PM. No reservations will be taken after this date! Payment of $16.00 for members, $19.00 for non-members will be accepted at the door with prior reservation. Please cancel your reservation by Friday, August 9, 2019 if you are unable to attend. It is the policy of the Society to bill for meals reserved but unclaimed. You may also pay with credit card via PAYPAL below: